Panasonic UF-490 Service Manual page 158

5.1.6. Service Mode 6 (RAM Initialization)
Initializes the RAM and restores the Function Parameters to their default values.
Note:
This operation should be performed when the unit is first installed.
Step
1 Standby
2 Press "FUNCTION" and then "7".
3 Press "MONITOR" four times, then press "*".
4 Press "6".
5 Press "V" or "/\ "to select the initialization mode.
Press "START".
6
7 Return to step 3 and press "STOP" to return to standby.
No. Initialize Mode
99 SHIPMENT SET (A)
98 SHIPMENT SET (B)
97 FLASH MEMORY ALL
CLEAR
(UF-4000/4100 only)
1# MANUFACTURE SET
16 LBP LOG CLEAR
15 LOGO/ID/PSWD CLR
14 ALL JOB CLEAR
13 PROG. DIAL CLEAR
12 AUTO DIAL CLEAR
11 JOURNAL CLEAR
* PARAMETER INIT.
Note:
Shipment Set does not affect the Drum Usage Counter. To clear the Drum Usage Counter press
[FUNCTION] [7] [8] [SET] [2] [SET] [1] [1].
Service Mode 6
Operation or Unit Condition
RAM Initialization Table
Deletes all setting information, except parameter number
80 and 81, then set default values. (See Note)
Deletes all setting information, except parameter number
61, 80 and 81, then set default values. (See Note)
Deletes all information in the Flash Memory.
Factory use only. DO NOT USE IN THE FIELD.
Clears the Printer Error Log.
Clears the Logo, ID, Polling Password.
Clears all Jobs stored in Flash Memory.
Clears the Program keys.
Clears the One-touch, ABBR Numbers and Phone Books.
Clears the Journal contents.
Restores the Fax and Function Parameters to default
values.
Description
158
LCD Display
MMM-DD 10:58 00%
SET MODE (1-8)
SERVICE MODE
*RAM INITIALIZE*
LOGO/ID/PSWD CLR
*INITIALIZE NOW*
MMM-DD 10:58 00%