Connecting The Telephone Line Cable And Power Cord - Panasonic UF-490 Service Manual

Hide thumbs Also See for UF-490:
Table of Contents

Advertisement

8.6.

Connecting the Telephone Line Cable and Power Cord

Power Cord
Plug one end of the power cord into an ordinary 3 prong AC outlet and the other end into the receptacle on
the rear of the machine.
Warning: This apparatus must be properly grounded through an ordinary 3 prong AC outlet.
Do not break off the earth (ground) prong to fit a 2 prong outlet.
Power Cord (Included)
Telephone Line Cable (Included)
Telephone Jack
Telephone Line Cable
Plug one end of the telephone line cable into the "RJ-11C" telephone jack supplied by the telephone
company and the other end into the LINE jack on the rear side of the machine.
NOTE
Your machine uses little power and you should keep it ON at all times. If the power is turned
OFF for too long (Up to 30 minutes), the clock contents may be lost.
External Telephone (Optional)
You can connect an additional standard
single line telephone to the machine.
244

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Uf-4000Uf-4100

Table of Contents