Summary Of Above 146.700, - 600 Split, 123.0 Tone - Baofeng UV-82 User Manual

Enter 1 2 3 0 [Menu] [Exit]
8. Enter the repeater output frequency, 1 4 6 . 7 0 0
9. Store RX frequency
Press [Menu] 2 7 [Menu]
Enter 9 9 (Memory Channel) (000 to 127 ) This is the channel that was cleared in
step 4.
Press [Menu] [Exit]
10. Press the [
TX frequency.
11. Press [Menu] 2 7 [Menu]
Enter the same Memory Channel entered above.
Press [Menu]
*
12. Press the [ Scan] again to exit the Reverse Mode.
13. Press [Exit] This will now appear it in the channel list when you switch to Channel
Mode.(MR)
SUMMARY OF ABOVE 146.700, - .600 SPLIT, 123.0 TONE
1. Set radio to VFO Mode (Frequency Mode)
2. [EXIT A/B] must be set to Upper Display.
3. Turn TDR OFF
[Menu] 7 [Menu] OFF
[Menu] [Exit]
4. Delete Prior Data
[Menu] 2 8 [Menu] Ch
No. (99) [Menu] [Exit]
5. Repeater Offset.
[Menu] 2 6 [Menu]
0 0 6 0 0 [Menu] [Exit]
6. Enter the TX Frequency Shift.
[Menu] 2 5 [Menu] Shift
[Menu] [Exit]
7. Set TX CTCSS or DCS codes for
Transmit.
[Menu] 1 3 [Menu] 1 2 3 0
[Menu] [Exit]
8. Enter RX frequency
1 4 6 . 7 0 0
9. Store RX frequency
[Menu] 2 7 [Menu] Ch No.
(99) [Menu] [Exit]
10. Reverse RX TX display
*
[ Scan ]
11. [Menu] 2 7 [Menu] Ch No.
*
(99) [Menu] [ Scan] [Exit]
Switch to Channel Mode. (MR)
*
Scan ] button. This activates Reverse Mode and displays the
PROGRAMMING MEMORIES BAOFENG UV 82
2