Ptt-Id(Ptt Or Release Ptt To Transmit The Signal Code); Bcl(Busy Channel Lockout); Sft-D(Direction Of Frequency Shift); Offset(Frequency Shift) - Baofeng UV-5R User Manual

Hide thumbs Also See for UV-5R:
Table of Contents

Advertisement

12.12.- PTT-ID(PTT OR RELEASE PTT TO TRANSMIT THE SIGNAL CODE):
-This feature allows you to know who call you.
-"OFF"-Don't transmit thecode while push the PTT button.
„„«™™™> \
-"BOT"-Transmit the code while push the PTT button.(the code only could be set by PC software.)
-"EOT"-Transmit the code while release the PTT button.
-"BOTH"-Transmit the code while pushor release the PTTbutton.
12.13.- BCL(BUSY CHANNEL LOCKOUT):
The BCLO feature prevents the radio's transmitter from being activated if asignal strong enough to
break through the "noise" squelch is present. On afrequency where stations us.ng different CI CSS
orDCS codes may be active, BCLO prevents you from disrupting their communications accidental!)
(because your radio may be muted by its own tone decoder).
12.14.- SFT-D(DIRECTION OF FREQUENCY SHIFT):
The "OFFSET" is the difference or offset between the reception frequency and the frcquency of
transmission for access to amateur radio repeaters. Set the "OFFSET" according to the OFFSET
amateur radio repeater through which want to communicate.
12.15.- OFFSET(FREQUENCY SHIFT):
When communicating via a repeater, the direction of displacement of frequency should be timed to
the displacement ofthe transmission frequency is higher orlower than the receiving frequency.
If we want to make acommunication through amateur radio repeater whose frequency Input fa MSfi00
MHz and 145,600 MHz is output, we select the "OFFSET" of ^.T^^n^Tfi^ue^
direction oftravel "SHIFT" programmed to [-], so the transceiver will always 145,600 MHz in frequency
and when you press [PTT! to transmit transceiver, the frequency will automatically move to
145,000 MHz
12.16.-STE (TAIL TONE ELIMATION):
This function is used to activate or deactivate the transmission end of the transceiver, ^^altone
transmission only be used in communications between transceivers and not in communications tlirougn
a repeater,which must be deactivated.
13.-CTCSS TABLE:
l
Tone(IIz)
67.0
11
Tone(llz)
94.8
21
Tonc(Hz)
131.8
31
Tone(Hz)
171.3
41
Toned I/)
203.?
2
69.3
12
97.4
22
136.5
32
173.8
42
206.5
3
71.9
13
100.0
23
141.3
33
177.3
43
210.7
4
7-1.4
14
103.5
24
146.2
34
179.9
44
218.1
5
77.0
15
107.2
25
151.4
35
183.5
45
225.7
r.
79.7
16
110.9
26
156.7
36
186.2
46
229.1
7
82.5
17
114.8
27
159.8
37
189.9
47
233.6
8
85.4
18
118.8
28
162.2
38
192.8
48
241.8
9
88.5
19
123.0
29
165.5
39
196.6
49
250.3
10
91.5
20
127.3
30
167.9
40
199.5
50
254.1
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents