Work Mode; Channel Mode - Baofeng UV-82 User Manual

VOX
4 14 Voice
Annunciation
VOICE
5 6 ABR
ABR
Work Mode (sets the start up condition each time the unit is turned on.)
6 Frequency
VFO/MR
7 Channel
VFO/MR
8 None CHT
Channel Mode (sets the start up condition each time the unit is turned on.)
9 None Menu
10 40 Reset
RESET
11 21 "A" Channel
Display Way
MDF-A
12 22 "B" Channel
MDF-B Display Way
13 16 DTMF-ST
DTMFST
On or Off
Off 1-5
Select/Not
Select/Not
1-128
(Ch# 0 = 1)
Select/Not
Select=Enabled
Unselect=Disable
Select/Not
Select=Enabled
Unselect=Disable
Channel
Channel_+_Name
Channel_+_Freq
Channel
Channel_+_Name
Channel_+_Freq
Off All
KB DTMF Side Tone
Send ANI DTMF ST
operation. Off is off
(1) Sensitive (10)
Least Sensitive
China Girl tells you
what key you have
pressed. Newer units
appear to have
English voice.
Sets the amount of
time in seconds (?)
that the screen
remains lit after a key
press, RX or TX.
Sets the unit so that it
boots up in the
Frequency Mode.
Sets the unit so that it
boots up in the

Channel Mode.

Sets the end number
of the Channel List (-
1) displayed in
software.
Enable (x)/Disable ( )
Menu Button on radio
is disabled. Keylock,
Scan and # keys
function.
Enable (x)/Disable ( )
Resets some options
to program at startup.
Check Disable to
prevent a Reset from
the keyboard.
Select your preference Handy to have
Select your preference Handy to have
Sends DTMF side
tones. Setting
determines if/when
tones are echoed to
Could cause
embarrassing
TX.
Actually helps
our blind Hams
and gives us a
chuckle.
It is a battery
saving feature.
Almost works.
Matter of
preference
Matter of
preference
Not much use.
Keeps folks
away from
settings as none
of the Menus
can be accessed.
Not sure why
you would not
choose to
Disable as
doing so
renders
Menu#40 moot.
Ch + Name in
one and Ch +
Freq in other.
Ch + Name in
one and Ch +
Freq in other.
Prefer =
KB DTMFST +
Send ANI
DTMFST