Pride Mobility Colt Owner's Manual page 33

V I . C O M F O R T
SEAT ROTATION
The seat rotation lever will secure the seat into several
positions.
1. Push forward on the seat rotation lever to disengage
the seat. See figure 16.
2. Rotate the seat to the desired position.
3. Release the lever to secure the seat into place.
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the seat forward or rearward to ad-
just the distance between the seat and the tiller.
1. Move the seat sliding lever located at the lower left
side of the seat outward.
2. While holding the lever out, slide the seat forward or
rearward.
3. Release the seat sliding lever once the seat is in the
desired position.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to several different heights.
See figure 17.
1. Remove the seat and/or shroud from your scooter.
See VII. "Disassembly and Assembly."
2. Remove the seat height adjustment bolt.
3. Raise or lower the upper seat post to the desired seat
height.
4. While holding the upper seat post at that height, match
up the locating holes in the upper seat post with those
of the lower seat post.
5. Insert the seat height adjustment bolt through the lo-
cating holes of both the upper and lower seat posts.
6. Reinstall the nut onto the seat height adjustment bolt
and tighten.
7. Reinstall the rear shroud and the seat.
Colt
A D J U S T M E N T S
Figure 16. Seat Position Adjustments
NUT
LOWER
SEAT
POST
Figure 17. Seat Height Adjustment
www.pridemobility.com
SEAT ROTATION LEVER
UPPER SEAT POST
LOCATING HOLE
SEAT HEIGHT
ADJUSTMENT BOLT
33