WGSW-24040HP series LED Indication Table
LED Definition
System
LED
Color
PWR
Green
■ Alert
LED
Color
FAN1
Green
FAN2
Green
FAN3
Green
PWR
Green
Per 10/100/1000Mbps port with PoE interfaces
LED
Color
LNK/ACT
Green
PoE In-Use
Orange
Per 100/1000Mbps SFP Combo Interface (Port -21 to Port-24)
LED
1000 LNK/ACT
100 LNK/ACT
Orange
2.1.3 Switch Rear Panel
The rear panel of the Managed Switch indicates an AC inlet power socket, which accepts input power from 100 to 240V AC,
50-60Hz.
Figure 2-3
shows the rear panel of the Managed Switch.
WGSW-20160HP Rear Panel
WGSW-24040HP Rear Panel
Lights to indicate that the Switch has power.
Lights to indicate the FAN1 failure.
Lights to indicate the FAN2 failure.
Lights to indicate the FAN3 failure. (For WGSW-24040HP4 only)
Lights to indicate the Power failure.
Lights:
To indicate the link through that port is successfully established at
10/100/1000Mbps.
Blink:
To indicate that the Switch is actively sending or receiving data over that port.
Lights:
To indicate the port is providing 56V DC in-line power.
Off:
To indicate the connected device is not a PoE Powered Device (PD).
Color
Lights. To indicate the port is successfully established at 1000Mbps.
Green
Blink: To indicate that the Switch is actively sending or receiving data over that port.
Lights: To indicate the port is successfully established at 100Mbps.
Blink: To indicate that the Switch is actively sending or receiving data over that port.
User's Manual of WGSW-20160HP/WGSW-24040HP series
Function
Function
Function
Function
37