EverFocus EDSR 900F Instruction Manual page 79

Hide thumbs Also See for EDSR 900F:

Table of Contents

E V E R F O C U S

E L E C T R O N I C S

Application - In this field, enter the name you wish to give the application.

Each name can be up to 12 characters.

Start/End - This is the port range. Enter the number that starts the port

range under Start and the number that ends the range under End.

Protocol - Enter the protocol used for this application, either TCP or UDP,

or Both.

IP Address - For each application, enter the IP Address of the PC running

the specific application.

Enable - Click the Enable checkbox to enable port forwarding for the

relevant application.

Change these settings as described here and click the Save Settings button to

apply your changes or Cancel Changes to cancel your changes.

Example:

DVR 80 to 80

DVR 1111 to 1111 Both

DVR 2222 to 2222 Both

C O R P O R A T I O N

Both

192.168.1.50

Enable

Table of Contents

Edsr1600f