Table of Contents
Advertisement
E V E R F O C U S
E L E C T R O N I C S
C O R P O R A T I O N
Time Stamp Position: This field is to set the position of the time stamp.
You can set the time position either on top or bottom. The default is set to
top. To change this, simply use the Jog Dial on the DVR. Press the Enter
key to make your selection.
Water Mark: This option is to turn water mark on or off when copying to
a Compact Flash card. By default this option is turned on. To change this,
simply use the Jog Dial on the DVR. Press the Enter key to make your
selection.
Water Mark Pos: This field is set the water mark position. You can set the
water mark to either the top or the bottom. The factory default is set to
top. To change this, simply use the Jog Dial on the DVR. Press the Enter
key to make your selection.
35
Advertisement
Table of Contents
