System - OPTICOM KD4 User Manual

3-4. System

Item
DVR ID
DESCRIPTION
LOAD DEFAULT
ADMIN
PASSWORD
NETWORK
PASSWORD
DATE FORMAT
SET DATE &
TIME
LANGUAGE
REMOTE
CONTROLLER ID
DLS
Table 3.4.1. Menu items in System Setup screen
The name of the system. Press the SEL button and move through the position for
each alphanumeric character by pressing the LEFT and RIGHT buttons. UP/DOWN
buttons are used to change character for each location.
Press SEL to see system information.
Choose OFF or ON. If selecting ON, press the SEL button to load defaults.
Set the password for the administrator. Once this menu is selected, the DVR will ask
you current password and new password. Follow the procedure provided by the
DVR. The password numbers (1,2,3,4) can be input by using direction keys.
The default password is 1111.
Set the password of network client. Once this menu is selected, the DVR will ask
you current password and new password. The DVR will guide you through the entire
process of setting up the user password. The password numbers (1,2,3,4) can be
input by using direction keys. The default password is 1111.
Select the preferred date and time display.
Set the present date and time. If DLS function is ON, user can not enter into this
menu and change data and time.
Select a language.
Select a ID of remote controller.
1. Select ID from 1 to 9.
2. Press the same number as ID set in DVR on a remote controller
3. Then icon will be displayed on Live screen of DVR that respond to the
remote controller.
User can set to ON or OFF for DLS(Daylight Saving) by using LEFT or RIGHT
button. After selecting ON, move the cursor to BEGIN(MM/DD/HH)field and press
the SELECT button to set the start time of DLS. And move to END(MM/DD/HH)field
to set the stop time of DLS by using UP or DOWN button.
CAUTION:
-DLS can't start from 23:00
-DLS can't be applied, if the date of BEGIN and END is same.
Description
19