Storage - OPTICOM KD4 User Manual

3-6. Storage

User can set recording mode in the hard disk drive or initiate format of the hard disk drive.
Item
OVERWRITE
FORMAT
USB UPGRADE
SAVE SETUP TO A
USB
LOAD SETUP FROM A
USB
VIDEO DELETE
DELETE VIDEO
AFTER
Table 3.6.1. Storage setup
Overwrite existing material when hard disk drive is full
Format hard disk drive
The firmware of DVR can be upgraded through USB port.
In order to upgrade, the upgrade firmware must firstly be downloaded and
copied into the USB device. Create a new folder in the USB memory stick and
copy the upgrade firmware "app.bin" into the folder. (This folder name should
be "upgrade". )
After the upgrade firmware is copied into the USB memory stick, do the
following;
1. Connect USB memory stick onto the USB port.
2. Go to the STORAGE>USB UPGRADE.
3. Select CONFIRM and then the upgrading will start automatically.
4. After the upgrade is completed, DVR will reboot automatically.
User can save the current configuration of DVR to the USB memory stick. Put
the USB stick on the front panel and press SEL to start the saving process
User can upload the configuration of DVR to another DVR using the USB
Memory stick. Put the USB stick on the front panel and press SEL to start the
loading process.
After upgrade is completed, DVR will reboot automatically and setup value will
be applied.
Enable/disable recording limit.
Set the limit days for recording to the hard disk drive from 1 to 60 days.
Description
26