Network - OPTICOM KD4 User Manual

3-5. Network

Set up your network parameters on the Network Setup screen.
Item
PORT
CLIENT ACCESS
BANDWIDTH SAVING
NETWORK TYPE
DHCP
ADSL (PPPoE)
LAN
DDNS
Table 3.5.1. Menu items in Network Setup screen
Port number (Default: 5445)
Enable/Disable remote access through client software.
Enable/Disable only key frame transmission. "ON" mode is favorable for
use of low network bandwidth. Mostly, set "OFF" for normal use.
Set the type of network connection. Options are:
LAN, DHCP, ADSL
Note. Other parts of the Network Setup screen change depending on what
network type you select.
Sets to use HDCP (If this is selected, DVR automatically get IP varying
from time to time from network.)
ID: Registered ID is necessary for ADSL connection.
Password: Registered pasword is necessary for ADSL connection.
IP: Register IP address that is assigned for DVR.
Gateway: Register Gateway that is assigned for DVR.
Subnet Mask: Register Subnet Mask that is assigned for DVR.
Enable/disable using domain name address through DDNS server.
"ON" mode, DDNS server name appears for domain registration.
The DDNS sever name is ns.standalone4ch.com.
CAUTION: Do not change this sever name. If this is changed, the DDNS
service cannot be used.
Registration
Check the MAC address of DVR from Setup>System>Description.
Please contact a distributor or an installer to register your DVR on a DDNS
Server. Register the domain name on DDNS Server.
After the domain name and MAC address of the DVR are registered on a
DDNS server, user can access the network with their own domain name.
Description
22