Wireless Remote Controller And Its Functions; La Telecommande Sans Fil Et Ses Fonctions; Kabellose Fernbedienung Und Ihre Funktion; Telecomando Senza Cavo E Relative Funzioni - Toshiba RAV-SM562KRT-E Owner's Manual

WIRELESS REMOTE CONTROLLER AND ITS FUNCTIONS

1 1 Infrared signal emitter 1 1 1
Transmits a signal to the indoor unit.
2 START/STOP button 2 2 2 2
Push the button to start operation.
(A receiving beep is heard.)
Push the button again to stop operation.
(A receiving beep is heard.)
If no receiving sound is heard from the indoor unit,
push the button twice.
3 3 Mode select button (MODE) 3
3 3
Push this button to select a mode.
Each time you push the button, a mode is selected
in a sequence that goes from A : Auto changeover
control, : Cool,
and back to A. (A receiving beep is heard.)
4 4
4 Temperature button (TEMP.) 4 4
, ....... The set temperature is increased up to 30°C.
9 ....... The set temperature is dropped down to 17°C.
(A receiving beep is heard.)
5 Fan speed button (FAN) 5 5 5 5
Push this button to select fan speed. When you
select AUTO, the fan speed is automatically
adjusted according to the room temperature.
You can also manually select the desired fan
speed from among five settings.
+
(LOW , LOW
+
MED , HIGH
(A receiving beep is heard.)
6 Auto flap button (SWING) 6 6 6 6
Push this button to swing the flap.
(A receiving beep is heard.)
Push the SWING button to stop the flap swinging.
(A receiving beep is heard.) (
7 7 Set flap button (FIX) 7
7 7
Push this button to adjust the air flow direction.
(A receiving beep is heard.) While this button is kept
depressed, the receiving tone continuously sounds.
( see page 14.)
8 8
8 On timer button (ON) 8 8
Push this button to set the ON timer.
To forward the time, push the "
To set back the time, push the "
9 9
9 Off timer button (OFF) 9 9
Push this button to set the OFF timer.
To forward the time, push the "
To set back the time, push the "
! ! ! SLEEP button (SLEEP) ! !
This function is not operated twin and group
combination. ( see page 7.)
Push this button to start the SLEEP timer (OFF
timer) operation.
You can select the OFF timer time from among
four settings (1, 3, 5 or 9 hours). (
" " Reserve button (SET) "
" "
Push this button to reserve time settings.
(A receiving beep is heard.)
: Dry, : Heat, : Fan only,
, MED ,
)
see page 14.)
" button.
" button.
" button.
" button.
see page 22.)
# # Cancel button (CLR) # # #
Push this button to cancel ON timer and OFF timer.
(A receiving beep is heard.)
$ Memory and Preset button (PRESET) $ $ $ $
Push this button to operate the air conditioner
according to settings memorized by the unit for future
operation.
Push the button again for more than 3 seconds to
memorize the setting indicated on the remote
controller and mark is indicated. (
% Automatic operation button (AUTO) % %
% %
Push this button to operate the air conditioner
automatically. (A receiving beep is heard.)
& &
& High power button (Hi POWER) & &
This function is not operated twin and group
combination. ( see page 7.)
Push this button to start the high power operation.
( see page 22.)
( ( ECO button (ECO) ( ( (
This function is not operated twin and group
combination. ( see page 7.)
Push this button to start the ECO (save energy)
operation. ( see page 22.)
) ) ) QUIET button (QUIET) ) )
This function is not operated twin and group
combination. ( see page 7.)
Push this button to start the quiet operation.
( see page 22.)
$
%
2
)
6
7
8
!
4
see page 13.)
1
5
4
3
&
(
#
9
"
EN