Table of Contents
Advertisement
LAN Is Not Functioning Properly
A)
Check if the LAN driver is installed properly.
B)
Check if there are any IRQ conflicts.
C)
Check if the RJ45 cable is properly connected.
D)
The on-board LAN chip could be defective.
COM1 ~ COM5 Are Not Functioning Properly
A)
Check if the I/O ports are enabled in the CMOS setup.
B)
Check if there are any IRQ conflicts.
C)
The main board or I/O board could be defective.
D)
(Reminder) The COM3 is shared by the read I/O and VFD, if you connector the VFD,
please remove the device which is connected with external COM3.
Cash Drawer Port Is Not Functioning Properly
A)
Make sure the pin assignment matches between the cash drawer and the RJ11 cash
drawer port.
B)
Verify if the digit I/O port address and bit are correct.
C)
The main board could be defective.
AerPOS Series AP-3615
49
Hide quick links:
Advertisement
Table of Contents
