Msr / Finger Print Reciever / Rfid / Ibutton Installation - AerPOS AP-3615 User Manual

MSR / Finger Print Reciever / RFID / iButton Installation

1. Remove the plastic cover
at the back of Touch
Display Module
2. Insert the MSR / RFID /
Finger Print Receiver / I-
button Module into USB A-
Type Connector. Fix the
Touch Display Module with
one screw.
3. Make sure the USB connected and screw is fastened well.
4. If you are looking for the detail Utility of MCR, Finger Print Reader, I-button Reader,
RFID Reader, please contact FEC's FAE.(Please refer to FEC website for more
information, http://www.fecpos.com
AerPOS Series AP-3615
)
7