AerPOS AP-3615 User Manual page 39

P-Capacitive Touch User Configuration
The P-Capacitive Touch is relating to humidity of environment, humidity of finger tips or
touching area size of finger tips. Moreover, these facts are relating with personal
experience. If user requires a slightly different touch performance, it can be adjusted from
the user configuration of touch utility.
Sensitivity (sensing performance): The value is form "1" ~ "100" ; "1" means the
1.
highest sensitive; "100" means the lowest sensitive ; default optimized value is "20".
After the Auto Detect with touch controller, please input the value (or adjust from tool
bar) to adjust the proper touch sensitivity.
overall touch experience is good. Default factory setting "20" is the most optimized to fit with majority of POS
environments.)
2. Assist Double Click (sensing tolerance distance between double click): The value is
from "1" ~ "100" ; "1" means the smallest tolerance 1 Pixel ; "100" means biggest
tolerance 100 pixels. Default optimized value is "30" Pixel.
double click, but it might cause the touch accuracy. Default factory setting "30" is the most optimized to fit with majority
of POS environments.)
3. Right Click Delay (the duration of the mouse right click function): The value is from
1sec ~10 seconds.
4. Click Response Time (the response ratio on touch click): The value is from 1~10. The
smaller value will have rapid touch response; bigger value will have slower response.
(Note: the most optimized Click Response Time is "5")
AerPOS Series AP-3615
(Note: the most optimized Right Click Delay Duration is 2 seconds)
(Note: The highest sensing performance does not have the
(Note: the higher tolerance would help
34