Fec Project - Capacitive Touch Utility (Raydium Controller) - AerPOS AP-3615 User Manual

FEC Project – Capacitive Touch Utility (Raydium Controller)
FEC Projective – Capacitive Touch Utility Introduces:
1. Activate Calibration
2. Mode of FEC Capacitive Touch Panel and default settings
3. Capacitive Touch User Configuration
4. F/W Reading or F/W Update
5. Touch Function for Second Screen
There are two different methods to do the calibration: (1) OSD on/off, (2) Utility Calibration
1. OSD on/off
The FEC P-CAP touch is Auto Calibrating during the Terminal boots up or power on the
display.
Please note: during the process of touch auto calibration, keeps finger touches or other metal parts from the
touch panel for 10 seconds until the calibration is finished.
2. Utility Calibration
"RADPara_20130417" Utility is able to run within windows XP and windows 7 OS environment
1. Execute Touch Utility "RADPara_20130417"
2. Click "Auto Detect" wait for 10 sec for connection between Touch Utility and Touch
Controller, until Touch or Mouse Mode shown.
3. Click "General" and press Calibration.
Please note: during the process of touch auto calibration, keeps finger touches or other metal parts from the touch panel for
10 seconds until the calibration is finished.
AerPOS Series AP-3615
Activate Calibration
30