Cash Drawer Installation - AerPOS AP-3615 User Manual

Cash Drawer Installation

Before connecting the cash drawer to the AP-3615, please make sure the drive voltage and cable
pin assignment of the cash drawer matches the definition of the cash drawer port of AP-3615.
Power USB
COM 5
12V
DC Out
DC IN
Note: If the cash drawer cannot be detected by the system, please refer to trouble shooting.
Pin1
Up to two cash drawers may be driven from this port. Driving voltage of the solenoid is
DC+12V. I/O port 284 is used for drawer operation. A test program is supplied, for Linux and
Windows, sample code of which is available on request by software developers.
Byte 1 (0xA0)
Byte 2-3 (0xA1 ~ 0xA2)
Byte 4-5 (0xA3 ~ 0xA4)
Byte 6 (0xA5)
Byte 7 (0xA6)
Byte 8 (0xA7)
Byte 9 (0xA8)
USB
COM1
Status
Cash COM2
USB
Status
Drawer
Value
0x00
0xA07
0xA07
0xFD
0xFB
0xFF
0x01
AerPOS Series AP-3615
COM 1
COM 3
COM 2
COM 4
Cash_Drawer1: DIO with RJ-11 Connector
PIN No.
1
2
3
4
5
6
GPIO / 0x01 or DIO / 0x00.
Output address.
Inpute address.
Open cashdrawer1 value.
Open cashdrawer2 value.
Close cashdrawer value.
Cashdrawer status mask.
15
LAN
USB Mic In
Signal Description
Ground
DIO Out 1
+12V / + 24V
DIO IN 0
DIO Out 0
Ground
Description
VGA
Line Out