St Touch Display Installation & Swapping - AerPOS AP-3615 User Manual

st
15" 1 Touch Display Installation & Swapping
1. Release 1 thumb screw at
the back side of Display
2. Lift the Display Module up
to disassemble from the
main unit of terminal
3. Display and main body
units are separated.
4. Reverse the process can
assembly back the Touch
Display Module.
** please make sure the
touch display module is
firmly connected to the
docking slot **
**Note**
During the process of disassembly and installation, please ensure the terminal is
"Power Off" and remove AC cord. "Hot Swap" could casue the internal protection to
block touch display functionality.
AerPOS Series AP-3615
13