Belling GOURMET 900 DF Service Manual page 55

10
C) GAS TAPS
D) COOLING FAN
ACCESS TO THE COOLING FAN FOR DIAGNOSTIC PURPOSES
CAN BE GAINED BY REMOVING THE COVER PLATE ON THE
REAR SERVICE PANEL
FOLLOW STEPS 2 AND 3 AND RE-
MOVE THE FACIA PANEL AND
HOTPLATE
UNDO BUNDY TUBE
CONNECTION AND REMOVE
DISCONNECT THERMOCOUPLE
REMOVE 2 GAS TAP SECURING
SCREWS AND REMOVE THE TAP
WHEN REPLACING TAP ALWAYS
ENSURE THAT A NEW TAP
WASHER IS FITTED (part number
081423974)
REMOVE THE FACIA/HOTPLATE
AND REAR SERVICE PANEL
REMOVE THE 2X SCREWS AS
SHOWN
PULL THE COOLING FAN FROM
THE DUCTING AND DISCONNECT
THE WIRING