Belling GOURMET 900 DF Service Manual page 10

Using The Programmer/Clock
Setting the minute minder
To set the Minute Minder, press the Function button
G
once. The bell symbol will appear and start flashing.
The flashing only lasts for 5 seconds so the time must be
set within this time frame.
G Use the Plus and Minus button to set the length of time
required. Once this has been done, the Minute Minder
is set.
G When the desired length of time has counted down the
alarm will sound. To cancel the tone, press any of the
buttons.
To cancel the Minute Minder at any time, press the Plus
G
and Minus buttons together.
Semi - Automatic Cooking
The Duration method
Switch off after a set time period
Press the Function button twice, which will skip past the
G
Minute Minder.
G The display will flash the word 'dur', and the 'A' will flash
on the left hand side of the display.
Use the Plus and Minus buttons to set the length of time
G
you want to cook for. This must be done within 5
seconds or the time of day will show again.
G Once this is done the oven will automatically switch off
once the time has elapsed, and the alarm will sound. To
switch off the alarm, press any button.
To view any remaining time press the function button
G
twice.
The End Time method
Switch off at a set end time
Press the Function button three times, which will skip
G
past the Minute Minder and the Duration programmer.
G The display will flash the word 'End' and the 'A' will flash
on the left hand side of the display.
Use the Plus and Minus buttons to select the time the
G
oven is required to turn off.
G Once this is done the oven will turn itself off at the time
you have selected. To switch off the alarm, press any
button.
7
A
A
A
A
A
A