Oki C9850 Maintenance Manual page 134

Category Item
Maintenance Format HDD Execute
Menu
FormatFlash
ROM
Reset
EEPROM
Personality IBM PPRIII
XL
EPSONFX
HP-GL/2
IBM5577
During the Engine Self-Diagnosis Mode, switch operations and the LCD display is instructed by the
engine irmware, therefore, it will vary from the speciications of the controller irmware operations.
Note that the Engine Self-Diagnosis Mode can also be executed in the state with the controller
PCD removed.
For details, accordingly refer to the Engine Speciications Manual.
43627911TH Rev. 3
Table 5-0. Maintenance Menu Display Table (2/2)
Value DF Old Menu
- "SYSTEM
MAINENANCE
MENU" –
"MAINTENANCE
MENU" – "HDD
INITIALIZE"
NEXT - "SYSTEM
MAINENANCE
MENU"-
"MAINTENANCE
MENU" – "FLASH
INITIALIZE"
Execute - "SYSTEM
MAINENANCE
MENU"-
"MAINTENANCE
MENU" –"MENU
RESET"
Enable *E "SYSTEM
Disable *J MAINENANCE
MENU"-
"PERONALITY" –
"IBM PPR III XL"
Enable *E "SYSTEM
Disable *J MAINENANCE
MENU"-
"PERONSALITY"–
"EPSON fx"
Enable "SYSTEM
Disable *JE MAINENANCE
MENU"-
"PERSONALITY"
– "hp-gl/2"
Oki Data CONFIDENTIAL
Function
Initialize the HDD. When executed
it will escape from the menu and
start initializing the HDD.[Display
Condition]
• Mount HDD ("Boot Menu"-
"Storage Setup"- "Enable
Initialization "Enable, "Boot
Menu"-"Storage Setup"-"Enable
HDD" Yes)
This displays the menu to initialize
the Flash ROM.
* Do not use this Menu.
This resets the EEPROM details to
the factory preset (factory default)
value. It automatically reboots after
the settings are made and applied.
* Some special items are not
initialized.
Changes the default PDL language
supported according to the
destination.The PDL language
disabled from this menu will no
longer be displayed on the "Print
Setup" – "Personality" of the
Function menu. When receiving print
data in the disabled PDL language,
display "INVALID DATA" and
dispose the incoming data. (HP-
GL/2 is currently under development
and there are no plans scheduled
for application for the product).
PDF requires Adobe Postscript,
therefore, it is not possible to turn
PDF ON/OFF by itself (if Adobe
Postscript is DISABLED, the PDF
Function will also be DISABLED).
It is not possible to DISABLE Adobe
Postscript and PDF with PX711/713.
(It shall be usually used in the
ENABLE state. Though DISABLE
is set the incoming data will still be
processed. It has been incorporated
for future extension purposes.)
Vailid Save
ET -
RB -
RB -
-
ET -
ET -
134 /