Unpacking The Printer; Choosing A Location - Pertech 5300 Setup Manual

1

Unpacking the Printer

Save all packing materials in case you need to repack the printer.
To report a printer that was damaged during shipping, see "Contact
Information" on the last page of this Guide.
To repack the printer, consult the above illustration and use the origi-
nal packing materials.
2

Choosing a Location

Place the printer on a level surface on or near the host computer.
Leave space to open the cover, change the paper, Ink Cartridge,
and to insert a form.
The maximum distance from the printer to the host and the power
supply is: 20 feet (RS-232 serial interface).
Ink Jet Packaging