Chapter 4 Remote Access - XVision X16D1H User Manual

Chapter 4
This section explains how users can access the X16D1H via the iWatchDVR software, an
internet browser and smartphone mobile apps. Please note the following:
- To access the DVR locally (LAN) users can simply use the network IP address, as
detailed in section 3 'Network Setup'.
If users are accessing their DVR's remotely, from a location outside their local network
-
(i.e. from home), they will need to ensure that they have suitable fixed IP address
(please consult your Internet Service Provider for further information).
- Users may need to configure their router so that they can access their DVR remotely, a
process known as 'Port Fowarding'. Please consult your technician or our technical
support for further details.
Please Note: The address used in this image is only for demonstration purposes only.
The actual DVR address will be specific to the local network environment or a user
defined address.
4-1
Remote Access via Software
The DVR Remote Desktop software will allow users to remotely access and control the DVR
from a PC. Please note that the software currently supports Windows XP SP2 and above.

Step 1: Enter the IP address of the DVR in an Internet browser (i.e. Internet Explorer)

Step 2: The user will then be prompted for an account Username and Password:

Step 3: The user will then be taken to an access page (detailed below) and can select
the relevant download link (i.e. iWatchDVR for PC or Mac) begin the download.
REMOTE ACCESS
X16D1H – User Manual
45