Camera Setup; 3-3.1 Ptz Setup - XVision X16D1H User Manual

System Setup Description
Item
Buzzer
Relay
Please see section 'Video Loss' (Event setup – page 25) on further details and
Receiver Setup.

3-3 Camera Setup

Camera Setup Description
Item
Mask
Name
Timestamp
The DVR allows users to control PTZ functions of your camera (See image above). Please
ensure that the PTZ camera is connected correctly to the RS-485 port of DVR.
PTZ Setup Description
Item
Enable
Protocol
PTZ ID
Baud Rate
Enable buzzer alarm when recording error
Enable a relay signal to be sent upon an event occurring
Check the box to Enable/Disable mask function for LIVE mode
Channel name
Set Time Stamp position ( by using adjacent blue box)

3-3.1 PTZ Setup

Click the box to Enable/Disable PTZ function.
Set up the protocol of PTZ cam. The supported protocols are:
PELCO-D, PELCO-P, Merit LiLin 1, Merit LiLin 2, SAMSUNG,
LG-MultixE
Select the PTZ ID (values from 0 to 255)
Select Baud Rate for PTZ (2400, 4800, 9600,19200)
X16D1H – User Manual
Description
Description
Description
29