Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for XVision X4D1H
Summary of Contents for XVision X4D1H
-
Page 1: User Manual
X4D1H PROFESSIONAL 4 CHANNEL REAL TIME D1 DVR User Manual... - Page 2 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. NOTE: This equipment has been tested and found to comply with the limits for a class digital device, pursuant to part 15 of the FCC Rules.
-
Page 3: Table Of Contents
X4D1H – User Manual Table of Contents CHAPTER 1 MAIN MENU SETUP ____________________________________ 3 1-1 RECORD SETUP ____________________________________________ 5 1-1.1 Quality & Frame Rate Setup ______________________________ 6 1-2 EVENT SETUP ______________________________________________ 6 1-2.1 MOTION SETUP ________________________________________ 7 1-2.1.1 MOTION AREA SETUP ______________________________ 7 1-2.2 SENSOR/ALARM SETUP _________________________________ 8... -
Page 4: Chapter 1 Main Menu Setup
X4D1H – User Manual CHAPTER 1 - MAIN MENU SETUP To enter the main menu and set up the DVR a user log-in and password are required. The default password of the administrator is ‘123456’. Please check the section ‘Account Setup’ for information on setting up other users. -
Page 5: Record Setup
X4D1H – User Manual Table 1-0.2 Remote Control Button Description Item Description Scroll LEFT/RIGHT Scroll UP/DOWN MENU Save current settings and return to live view mode Return back to the previous menu level without saving ENTER Enter the selected menu option or bring up the virtual keyboard Please Note: A new hard drive must be formatted before it can be used. -
Page 6: 1-1.1 Quality & Frame Rate Setup
X4D1H – User Manual 1-1.1 Quality & Frame Rate Setup Item Description Select a recording mode from Normal or Event. Normal recording to a Normal/Event standard recording mode defined by the user. Event recording refers to Setup recordings either Motion Detection or an Alarm sensor being triggered... -
Page 7: 1-2.1 Motion Setup
X4D1H – User Manual 1-2.1 MOTION SETUP Item Description Alarm Duration The number of seconds the alarm buzzer remains activated once motion has been detected (Seconds) Select chosen channel to apply the motion detection Enable Select checkbox to Enable/Disable motion detection for each channel Drag the on–screen white bar or press ◀... -
Page 8: 1-2.2 Sensor/Alarm Setup
X4D1H – User Manual Item Description Mask Mouse Selection Check box to enable/disable using the mouse to set the motion detection area (i.e. drag and select) All Area Detection Selects the entire screen as a detection area. Mask All Area Deselects the entire screen as a detection area. -
Page 9: Schedule Setup
X4D1H – User Manual 1-3 SCHEDULE SETUP Except from starting recording manually, you can also setup the recording time by weeks and a specific schedule which includes normal, motion detection, and recording type. Item Description Page Each page provides 10 schedules for setup (5 pages in total) -
Page 10: 1-3.2 Holiday Setup
X4D1H – User Manual 1-3.2 Holiday Setup The user can select the specific dates to be designated as holidays, which can then be specified during the configuration of scheduled recording. 1-4 CAMERA SETUP Item Description 1~16 Select to choose the setup camera setup requirements for each individual channels. -
Page 11: Account Setup
X4D1H – User Manual 1-5 ACCOUNT SETUP The Account Setup menu is used to provide a maximum of 4 users’ individual and unique access to the DVR over a network setup. The default administrator account username and password is ‘admin’ and ‘123456’. -
Page 12: 1-5.2 User Picture Setup
X4D1H – User Manual 1-5.2 User Picture Setup Users can select the ‘Change’ button then select a picture to be added to their profile: 1-6 NETWORKING SETUP Item Description Connect type Setup mode for network connection: (ADSL, DHCP, LAN, 3G). -
Page 13: 1-6.1 Networking Setup
X4D1H – User Manual 1-6.1 NETWORKING SETUP There are four methods that allow the DVR to be connected to a network: 1-6.1.1 DHCP When DHCP is selected, IP address will be assigned by DHCP server automatically. 1-6.1.2 LAN Select LAN for network connection, the following information is required:... -
Page 14: 1-6.1.3 Adsl
X4D1H – User Manual 1-6.1.3 ADSL Select ADSL for network connection, the following information is required. Item Description Enter user name provided by user’s ISP User Name Enter password provided by user’s ISP Password 1-6.1.4 3G Select 3G for network connection, the following information is required. -
Page 15: 1-6.2 Http Setup
X4D1H – User Manual Item Description Enable Select checkbox to enable advanced settings User Name Enter username (provided by the ISP) Password Enter password (provided by the ISP) IP Address Enter the fixed IP address (provided by the ISP) Please Note: This feature may not work with all 3G cards (Please contact technical support for further details) 1-6.2 HTTP Setup... -
Page 16: 1-6.3 Ddns Setup
X4D1H – User Manual 1-6.3 DDNS Setup Item Description Enable DDNS Select checkbox to enable/disable DDNS function. Enter the registered DDNS Server: DDNS Server (i.e. details taken provider from such as no.ip.org) Host Name Enter the completed registered SMTP Server. -
Page 17: Ptz & Rs485 Setup
X4D1H – User Manual Item Description Enable E-mail Notification Select checkbox to enable/disable E-mail Notification function. SMTP Server Enter to set up SMTP Server name. Port Select specific Port (if required). User Name Enter to set up User Name. Password Enter to set up Password. -
Page 18: System Setup
X4D1H – User Manual 1-8 SYSTEM SETUP Item Description Set the name of the DVR. This will be displayed when users login DVR Name remotely) DVR Location The location of DVR will be shown when users login remotely Use the ▼ button to select OSD language. -
Page 19: 1-8.1 Display Setup
X4D1H – User Manual 1-8.1 DISPLAY SETUP Item Description Set up duration time (in seconds) for the interval between the channel Auto-Seq Interval switching channels under Auto-Sequential mode. Show OSD Turn On / Off OSD display. Show DVR Status Turn On / Off DVR illustration and record status display. -
Page 20: 1-8.2.1 Change Date & Time
X4D1H – User Manual 1-8.2.1 CHANGE DATE & TIME This allows the user to setup the DVR’s date and time, as detailed below: 1-8.2.2 TIME ZONE AND DAYLIGHT SAVING TIME SETUP Set up time zone and activate Daylight Saving Time function according to user’s DVR location. -
Page 21: 1-8.2.3 Internet Time Setup
X4D1H – User Manual 1-8.2.3 INTERNET TIME SETUP Synchronize your DVR time with an internet time server: Item Description Check to enable DVR’s automatic synchronization function. Once Automatic selected the DVR will automatically synchronize the time upon Synchronization rebooting or by every 24 hours after booting. - Page 22 X4D1H – User Manual Item Description Key Tone Enable/Disable sound/tone when the front panel buttons are used. Enable/Disable which functions will generate a buzzer sound (i.e. HDD Buzzer error, Video Loss, Motion Detection and Sensor/Alarm triggers). Enable/Disable which functions will allow a signal to be sent to the RELAY Relay OUT (Alarm Output) (i.e.
-
Page 23: 1-8.4 Spot Setup
X4D1H – User Manual 1-8.4 SPOT SETUP Item Description SPOT MODE Check to select the chosen spot mode. The duration time in seconds for the interval between channels under Interval (Seconds) SPOT mode. Skip Video Loss Channel Select to skip channels without video signal. -
Page 24: Utility Setup
X4D1H – User Manual 1-9 UTILITY SETUP Item Description Select to enter hard disk initialization (i.e. format) menu but please ensure the DVR has stopped recording. On entering the menu select the hard drive to be formatted and then press ‘Start’. -
Page 25: Diagnostic
X4D1H – User Manual 1-10 DIAGNOSTIC Item Description Version This displays the current firmware version of DVR This displays the connected IP address of DVR. If disconnected from network the screen will display the following: ‘NETWORK DISCONNECT’ MAC Address of DVR... -
Page 26: Chapter 2 Backup & Search
X4D1H – User Manual CHAPTER 2 - BACKUP & SEARCH 2-1 BACKUP SETUP Users can backup any segment of recorded data within a specified time frame, using a USB memory device which must be connected to the DVR. The backup file that is produced by the DVR is an IRF file which is designed to be played back with the software called ‘Ifileplay’... - Page 27 X4D1H – User Manual iFileplay Use Method Step 1: Install ‘iFileplay’ software to your PC (i.e. ’iFileplay’ file will be included on the installation CD provided with this DVR). Please Note: When using a USB flash drive to backup data, the DVR will automatically copy the ‘Ifileplay’...
-
Page 28: Search Setup
X4D1H – User Manual 2-2 SEARCH SETUP Item Description Event Search Select to enter the Event Search Menu Time Search Select to enter the Time Search Menu 2-2.1 EVENT SEARCH The DVR automatically records events with channel information such Event Type, Date/Time, User etc. -
Page 29: 2-2.1.1 Criteria Setup For Event Search
X4D1H – User Manual Item Description Setup parameters of the event search. Criteria Switch between the various pages of events. Page Date/time when the event occurred. Date/Time Event types are defined as the following: MOTION Motion Detected Video Loss Video Loss... -
Page 30: 2-2.2 Time Search
X4D1H – User Manual 2-2.2 TIME SEARCH TIME SEARCH can search for the specific time of recording data to playback. Users can press ‘Enter’ or left click on the desired date to playback. Please note that dates that contain recorded data are marked with a red square □. -
Page 31: Chapter 3 Remote Access
Chapter 3 REMOTE ACCESS This section explains how users can access the X4D1H via the iWatchDVR software, an internet browser and smartphone mobile apps. Please note the following: To access the DVR locally (LAN) users can simply use the network IP address, as detailed in section 3 ‘Network Setup’. - Page 32 X4D1H – User Manual Step 4: Run/install the downloaded iWatchDVR software and the user will be prompted for the login details to the DVR (IP address, Port Number, Username and Password): Please Note: The drop-down menu can be used to record previous IP addresses.
-
Page 33: Remote Access Via Internet Explorer
X4D1H – User Manual Remote Access via Internet Explorer The DVR Remote Desktop software will allow users to remotely access and control the DVR via an Internet browser. Please note that the software currently supports Microsoft Internet Explorer 7, 8 and 9. - Page 34 X4D1H – User Manual Additionally users at can access a simpler version of the software by selecting the ‘JPEG Viewer’ option at STEP 3: This allows the user to log into one channel at a time (using the dropdown menu) and generates...
-
Page 35: Remote Access Via Smartphone Apps
X4D1H – User Manual 3-3 Remote Access Via Smartphone Apps Smartphone apps that allow the user to access their DVR are currently available for Android, iPhone/iPad and Windows Mobile. These apps provide a host of features that allow the user to view live footage (single screen or multi-view options), control PTZ cameras, Zoom, Backup, and search events/logs. -
Page 36: Minimum Software Requirements
X4D1H – User Manual Step 3: Select to the chosen DVR and once the user details have been correctly verified they will be taken to the main access page. 3-4Minimum Software Requirements The remote desktop software requires minimum hardware requirements to operate the software...