Connecting To The Lan Terminal; Connecting To The Rs­232C Terminal; Connecting To The Remote Terminal - JVC DLA-­X95R Instructions Manual

Connecting to the LAN Terminal
This Unit
.
The network is used to control this unit. It is not used for sending or receiving video signals.
Please contact your network administrator for information concerning the network connection.
Set "ECO Mode" to "Off" if RS­232C/LAN communication is performed or the HDMI link function is used in the
Standby mode. (p. 62)
For more information on control, please refer to "External Control" (p. 72).
Connecting to the RS­232C Terminal
This Unit
To [RS-232C] Terminal
RS-232C Connection Cable (Sold Separately)
.
Set "ECO Mode" to "Off" if RS­232C/LAN communication is performed or the HDMI link function is used in the
Standby mode. (p. 62)
For more information on control, please refer to "External Control" (p. 72).
Connecting to the REMOTE Terminal
This Unit
.
For more information on the external infrared sensor and connecting cable, please contact your dealer.
24
To [LAN] Terminal
Connection Cable
(Sold Separately)
Desktop PC, etc.
To [REMOTE] Terminal
Connection Cable
(Sold Separately)
Network
Laptop, etc.
RS-232C Terminal
External Infrared Sensor
(Sold Separately)
Hub
Server