Viewing 3D Movies
Connect this unit to a 3Dcompatible
HDMI device, and turn on the power
to play back the 3D video image
For details on how to play back 3D video images,
please refer to the instruction manual of the
player or recorder in use.
When 3D signals are received, the video image
switches automatically to the 3D format.
This unit supports the following 3D formats.
Frame packing
Sidebyside
Topandbottom
In the default setting, "3D Format" is set to "Auto"
for automatic projection of 3D images.
If the image does not switch to 3D automatically
Press the [3D FORMAT] button on the remote
control
.
Converting 2D Movies to 3D Movies for Viewing
Press the [3D SETTING] button to
display "3D Setting"
.
Input Signal
>
3D Setting
3D Format
Auto
2D to 3D conversion
Off
Parallax
0
Crosstalk Cancel
0
Intensity
1
Sub Title Adjust
Off
Operate
Exit
MENU
Select
Pressing the [3D FORMAT] button each time
switches the mode in the following sequence:
"Auto" "Side by Side" "Top and Bottom"
"2D" "Auto"...
Format
Auto
Side by Side
Top and Bottom
2D
Turn of the power of the 3D GLASSES
and put them on
The PKAG1 powers on automatically.
Select "2D to 3D conversion" followed
by "On", and press the [OK] button
Press the [MENU] button to exit
MEMO
Depending on the movies, 3D effect may be less than
what you expected.
Back
BACK
Description
The format is detected and
configured automatically.
Select this setting if the 3D input
signal is of the sidebyside
format.
Select this setting if the 3D input
signal is of the topandbottom
format.
Select this setting if 2D images
are falsely recognized as 3D
ones.
35