Connecting via HDMI-DVI conversion cable
This Unit
To [HDMI 1] or [HDMI 2] input
terminal
HDMI-DVI Conversion Cable (Sold Separately)
If noise occurs, move the desktop PC away from this unit.
0
If the video is not displayed, try to reduce the length of the cable or lower the resolution of the video transmitting
0
equipment.
Connecting to the LAN Terminal
This Unit
To [LAN] Terminal
The network is used to control this unit. It is not used for sending or receiving video signals.
0
Please contact your network administrator for information concerning the network connection.
0
Configuration of a network password is necessary before connecting to the LAN terminal. (P. 87) (DLA-NZ9BK,
0
DLA-NZ8BK, DLA-NZ7BK, DLA-NP5BK, DLA-RS4100K, DLA-RS3100K, DLA-RS2100K, DLA-RS1100K)
Set "ECO Mode" to "Off" if LAN communication is performed in the Standby mode. (P. 86)
0
For more information on control, please refer to "External Control"P. 103.
0
Connecting to the RS-232C Terminal
This Unit
To [RS-232C] Terminal
Set "ECO Mode" to "Off" if RS-232C communication is performed in the Standby mode. (P. 86)
0
For more information on control, please refer to "External Control"P. 103.
0
Desktop PC, etc.
Connection Cable
(Sold Separately)
RS-232C Connection
Cable (Sold Separately)
Desktop PC, etc.
DVI Output Terminal
Network
Laptop, etc.
RS-232C Terminal
Hub
Server
31