Replacing The Lamp; Lamp Replacement Procedure - JVC DLA-­X95R Instructions Manual

Replacing the Lamp
The lamp is a consumable item. If the image appears dark or the lamp goes out, replace the lamp unit.
When the lamp replacement time approaches, the user is notified with a message displayed on the screen and by
the indicator. (p. 81)
Lamp Replacement Procedure
CAUTION
Do not insert your hands into the opening of the lamp.
This could cause significant deterioration in the
performance of the equipment, or lead to injury and
electric shock.
Do not replace the lamp immediately after the unit has
been used. Allow a cooling period of at least one hour
before replacement. The temperature of the lamp is
still high, and may cause burn injuries.
Do not subject the lamp unit to shock. Doing so may
cause lamp blowout.
Do not use a flammable air duster to clean the internal
parts of the unit. Doing so may cause fire.
Use only genuine replacement parts for the lamp unit.
Also, never attempt to reuse an old lamp unit. This
may cause the unit to malfunction.
Do not touch the surface of a new lamp. Doing so may
shorten the lamp life and cause lamp blowout.
When replacing the lamp, be careful not to injure
yourself as the lamp may be broken.
When replacing the lamp of a projector suspended
from the ceiling, work at height is required. This is a
dangerous operation. Please consult our service
center.
Pull out the power plug from the power
outlet
Remove the lamp cover
Remove the screws with a t screwdriver.
.
Loosen the screws of the lamp unit
Loosen the screws with a t screwdriver.
.
Pull out the lamp unit
Grasp the handle and pull out the lamp unit.
.
Handle
65