Connecting the Projector
Do not turn on the power until connection is complete.
0
The connection procedures differ according to the device used. For details, please refer to the instruction manual of
0
the device to be connected.
This projector is used for projecting images. To output the audio of connected devices, please connect a separate
0
audio output device, such as an amplifier or speaker.
Some cables cannot be connected to this unit due to the size of their connector cover.
0
Connecting to the DisplayPort Terminals
This Unit
For single-channel input signals, connect to one of the [DisplayPort 1], [DisplayPort 2], [DisplayPort 3] or [DisplayPort
0
4] input terminals.
For two-channel input signals, connect to the [DisplayPort 1] and [DisplayPort 3] input terminals.
0
For four-channel input signals, connect to the [DisplayPort 1] to [DisplayPort 4] input terminals.
0
Æ "Types of Possible Input Signals" (P. 63)
Video images may not appear if a cable that does not support HBR2 is used. Use a cable that supports HBR2.
0
When disconnecting the DisplayPort cable, make sure to release the latch and unplug the cable.
0
Connecting to the LAN Terminal
This Unit
To [LAN] Terminal
The network is used to control this unit. It is not used for sending or receiving video signals.
0
Please contact your network administrator for information concerning the network connection.
0
For more information on control, please refer to "External Control"P. 56.
0
22
To [DisplayPort 1] to [DisplayPort 4]
Input Terminals
DisplayPort Cable (Sold Separately)
Desktop PC, etc.
Connection Cable
(Sold Separately)
PC, etc.
DisplayPort Terminal
Hub
Network
Server