Replacing The Battery - Intermec PB40 Quick Start Manual

Self-Test Print-out Explanation (continued)
Test Item Description
Available Bar Codes All supported barcodes are displayed. "DE-
SCRIPTION" describes the graphic. "NAMES"
give the "Easy Print" name, the Line Printer name,
and the hexadecimal equivalent of that name.
Card Reader Option Shows the current Card Reader configuration.

Replacing The Battery

1 Open the cover and push the battery lock tabs away while
lifting up the battery. The battery pack fits very tightly so it
takes some effort to remove them.
2 Insert the new battery by putting the non contact area of the
battery in first towards the center.
3 Push down on the battery near the battery lock tabs. Ensure
that the battery is completely seated and tab fits over the top
of the battery.
4 Charge the new battery.
Battery lock tabs
(one on each side)
Using Your Printer with Serial Connection
1 Attach the Mobile Computer to Printer cable.
PB40 Printer Quick Start Guide
Center battery
support posts
Battery
packs
9