Installation - Kenwood KD 150 Instructions For Use Manual

7 - INSTALLATION

IMPORTANT
• The appliance should be installed by a QUALIFIED INSTALLATION TECHNICIAN.
The appliance must be installed in compliance with regulations in force.
• You need the following housing area to fit your oven correctly.
• The double oven is designed to fit into a cabinet of 600 mm width.
• The double oven can be built in the kitchen units, but you must ensure that it is properly
ventilated.
• In the diagram the appliance is ventilated by means of the space in the top of the
kitchen cabinet.
• Lift the appliance into position onto the shelf, taking care NOT to lift it by the door
handles.
• Remember the housing should not be free standing but be secured to the wall and/or
adjacent fittings.
WARNING
• We would point out that the adhesive which bonds the plastic laminate to the furniture
must withstand temperatures not less than 150° C to avoid delamination.
• The appliance must be housed in heat resistant units.
• The walls of the units must be capable of resisting
temperatures of 75 °C above room temperature.
Dimensions Oven
(mm)
Height 888
Width 594
Depth 560
Housing
877
560
555 min.
Fig. 7.1
25