Kenwood KD 150 Instructions For Use Manual page 19

WIRE RACKS
• Assemble the wire racks to the oven walls using the 2 screws (Fig.6.1a - 6.1b).
• Slide into the guides, the shelf and the tray (fig. 6.2a - 6.2b).

The shelf must be fitted so that the safety notch, which stops it sliding out, faces the
inside of the oven; the guard rail shall be at the back.
• To dismantle, operate in reverse order.
Guard rail
TOP OVEN
Fig. 6.1a
Stop notch
Fig. 6.2a
Guard rail Stop notch
BOTTOM
MAIN OVEN
Fig. 6.1b
Fig. 6.2b
19