Replacing the inner pane of glass
1.
Make sure the door is locked open
(see fig. 6.5c).
2.
Replace the inner pane:
•
Check that the four rubber pads are in
place ("D" in Fig. 6.6a).
•
Check that you are holding the pane
the correct way. You should be able to
read the wording on it as it faces you.
•
Insert the pane in the left "E" and right
"F" slide guides (fig. 6.6b), and gently
slide it to the retainers H (fig. 6.6c).
•
Top oven door only: Reassemble the
seal "G" in the correct way (fig. 6.6d)
by hooking the no. 3 fixing hooks in the
proper holes.
•
Unlock the oven door by opening it
completely and closing the lever "A"
on the left and right hinges (Fig. 6.6e).
Fig. 6.6c
The lower oven
door has not a
sealed gasket
in the top part.
The top oven door
has a sealed
gasket in the
top part.
It is normal the opened gap between
the top edge of the inner glass and the
sealed gasket. This allows the cooling
air circulation.
E
E
Fig. 6.6b
H
Fig. 6.6e
D
Fig. 6.6a
F
F
G
Fig. 6.6d
A
23