Kit Assembly - Regency G51 Owners & Installation Manual

INSTALLATION

KIT ASSEMBLY

Parts
1) Top Assembly
2) Base Assembly
3) Back Panel
4) Left Side Panel
5) Right Side Panel
6) Front Panel
6
Kit Assembly
1) Lay the Base Assembly on a flat surface.
2) Attach the Left and Right Side panels to the Back
panel (one screw each side). NOTE: the Side flanges
are on the outside, Back flanges are on the inside.
3) Lift the Back/Side Assembly onto the Base, position
as shown in the diagram. The Back and Sides rest on
the Base with the Base flanges on the outside. Fasten
the Back to the Base (3 screws) and the Sides to the
Base (2 screws for each side).
4) Attach the top assembly, with the top flanges on the
outside of the Sides and Back panels.
G51 Zero Clearance Kit