Document Size - Fujitsu M3099EX Reference Manual

• If you have set the HOPPER HEIGHT to
500 in SETUP MODE (see Operator's
Guide), you can set sheets up to the
middle line in the hopper.
• If you have set the HOPPER HEIGHT to
250, you can set sheets up to half the
height of the middle line in the hopper.
• Use the extension for long documents.
• Do not mix different width documents.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
3
Adjust the stacker table to the

document size.

NOTE
Extend the stacker table and extension for
long documents. (greater
than A4 or LT) Turn down
the lever and extend the
stopper for small
documents.
Stopper adjustment:
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Stopper
Document
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
MAX line
Middle line
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Stacker table Lever
(inside)
Extension
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Scanned documents are stacked
4
in the stacker for removal.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Stacker
Stopper
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○
○ ○ ○ ○ ○
1-5