Controls - Carrier XPower 40DQV Installation Manual

Selecting S.HI speed
the unit is configured for three speeds, LO-
ME-HI. To select S.HI speed, proceed as
follows:
• open the cover of the unit's electrical
panel;
• move the faston "A" connector (with the
brown wire"B"), to faston "C" (black wire);

Controls

Warning: disconnect the power supply
before opening the control unit cover.
The unit can be used in conjunction with
the infrared remote control or the "Room
Controller" or "Zone Manager" cable type
remote control (optional accessories).
IR remote control
GB-20
• close the unit's electrical panel again.
Instructions for use of the cable-type and
infrared remote controls are included in the
respective manuals.
The control units must be opened and
installed by qualified personnel only.
"Room Controller"
A
C
B
J7
"Zone Manager"