Sea Ray 290 Sundancer Owner's Manual page 129

S 8 • R
ECTION
Routine inspection, service and maintenance of
your boat's systems are vital to assure your safety,
as well as for prolonging the life of your boat. You
should develop regular routines for inspecting your
boat. The chart below summarizes inspection,
service and maintenance activities. This section
also contains descriptions of some convenient
methods for evaluating the condition of some of
your boat's systems.
1. S G
UMMARY UIDE FOR
ITEM
MAINTENANCE/SERVICE
Battery Check water level
Bilge Area Clean and check
Bilge Blower Hose connections tight
Bilge Pump Float switch operates freely
Canvas Clean
Controls
Steering Check for proper operation
Power steering oil level
Gear Shift & Throttle Lubricate. Include all shift
linkage and pivot points
Electrical
Connections Check for looseness
**GFCI (AC) Outlet Check for operation
Engine
Alarm Check
Cooling System Check for leaks
Connections with engine running
Crankcase Clean
ventilating system
Drive belts Check
Exhaust System Check for leaks
Flame Arrestor Clean
Fuel Filter Replace
Mounts (Fasteners) Tighten
Oil and Filter Replace
Oil Level Check
Stern Drive (With Stern Drive Engine Option)
Fluid level Check level
Fluid Replace
*Use in salt water or other severe operating conditions requires shorter maintenance/service intervals
**May not be on your boat
®
290 Sundancer
I
EQUIRED NSPECTION
I , S
NSPECTION
REQUIRED REFERENCE
SOURCE
Owner's Manual p. 6.1
Owner's Manual p. 4.1
Owner's Manual p. 4.3
Owner's Manual p. 4.1
Owner's Manual p. 9.3
Engine Manual
Engine Manual
Owner's Manual p. 6.12
Engine Manual
Engine Manual
Engine Manual
Engine Manual
Engine Manual
Engine Manual
Engine Manual
Engine Manual
Engine Manual
Engine Manual
Engine Manual
Engine Manual
, S
ERVICE
The interval between necessary service or
maintenance is highly variable, depending on the
environment your boat is in, and on the severity
of operating conditions. For example, corrosion
of parts on boats operated in salt water proceeds
much faster than the corrosion of parts on a boat
operated in fresh water. The intervals listed below
are recommended maximums, and you must reduce
the time between inspections if your observations
indicate the need.
M
ERVICE AND AINTENANCE
BEFORE AFTER
EVERY FIRST
USE 20 HOURS
•
To be done by Sea Ray dealer every six months
•
To be done by Sea Ray dealer annually
•
•
•
•
•
•
& M
AIN TE NANCE
INTERVAL
EVERY EVERY
25* OR 50 50* OR 100
HOURS HOURS
• •
•
As Needed
• •
• •
• •
• •
•
•
•
EVERY 6
MOS. OR
ANNUALLY
•
•
•
•
•
•
•
•
8.1