Table of Contents
Advertisement
Fig 4.1.1.2
Press the 2 silver "Spring pins" in and
slide the 2 locking pieces down over the
lower tube sections.
Fig 4.1.1.4
WARNING:
If the locking sliders are not in the correct position, or the spring pins do not
protrude thereby allowing the locking clips to move back up the frame, then the
frame may collapse in use.
Folding the wheelbase: To unlock the frame and fold the wheelbase, reverse the above
instructions.
Document No: 053-03 v5
Snugseat Snappi User Manual.doc
Snugseat Snappi User Manual
Next locate the 2 plastic locking sliders.
These will be stowed in the "open" position
and are held in place by 2 small spring clips.
The pins will spring through the holes in the
sliders and hold them in place (see left).
Page 9 of 37
Fig 4.1.1.3
September 2010
Advertisement
Table of Contents
Need help?
Do you have a question about the Snugseat Snappi and is the answer not in the manual?