Using The Thermometer; Changing Setup Options; Entering Or Exiting Setup; Setup Options - Fluke 51 User Manual

Using the Thermometer

1. Plug the thermocouple(s) into the input connector(s).
A
2. Press
After 1 second the thermometer displays the first reading.
If no thermocouple is plugged into the selected input or the
thermocouple is "open," the display shows "- - - -"

Changing Setup Options

Use Setup to change the thermocouple type, offset, sleep
mode, and line frequency settings.
The thermometer stores the settings in its memory. Setup
settings reset only when the batteries are removed for
more than 2 minutes.
Downloaded from Elcodis.com electronic components distributor
to turn on the thermometer.

Entering or Exiting Setup

When the thermometer is in Setup mode, the display
shows s.
• D
Press to start or exit Setup.

Setup Options

Menu
Option Item
Thermocouple TYPE
Type
O
Offset
SLP
Sleep Mode
Li ne
Line Frequency
51 & 52 Series II
Using the Thermometer
Settings
J, K, T, or E
T1 or T2 (Model 52)
on (sleep mode on)
or 0FF (sleep mode
off)
50 H (50 Hz)
or 60 H (60 Hz)
9