Table of Contents
Advertisement
3.6
telnet connection may be changed.
3.7
negotiated again.
3.8
settings were not saved to the EEPROM, they will be lost.
3.9
interconnected LANs create one whole in the hardware layer. Three
settings are available:
3.10
3.6.
Language selection
Language:
English
After pressing Enter the language used on LCD and during the
3.7.
Connection reset
Connection reset
(press Enter)
After pressing Enter the G.shdsl link will be disconnected and
3.8.
Modem reset
Modem reset
(press Enter)
After pressing Enter the whole modem is rebooted. If some
3.9.
Bridge mode
Bridge:
on
This option enables or disables the bridge mode, in which two
off - regular TCP/IP routing
on - bridge enabled, but the modem is still available under its IP
address and thus may be managed remotely
transparent - completely transparent bridge
3.10.
Line parameters
The "Esc" button returns to the main screen (with modem type,
7
Advertisement
Table of Contents
