Cooking Instructions - Thane Housewares Flavorwave Deluxe Wave Owner's Manual

Table of Contents

Advertisement

General Use Instructions
• Make sure the unit is safely plugged into a properly grounded outlet
and that the cord is not touching any hot object.
• Make sure that the glass tray has been placed within the base.
• Do not place the glass tray directly onto a stove burner or direct heat
source. It will crack or break.
• Metal and glass dishes, pans, and foil may be safely used within the
Flavor Wave Oven.
How to Open Heat Control Assembly and
Dome Assembly
Make sure the Heat Control assembly is tightly locked into the dome,
then the Heat Control Assembly and Dome Assembly can be easily
opened and put aside as shown in steps 1, 2 and 3: Place dome holder
under either side of base handle. Make sure both feet of the dome holder
are placed inside the handle and the dome holder is resting horizontally
on a flat surface. Then the power head and dome assembly can be placed
on the dome holder as shown in step 3.
Step 1

Cooking Instructions

Lift dome only by the handles on
the Heat Control assembly. Once
the Heat Control assembly and the
t r a n s p a rent dome are locked in
place, the Heat Control assembly
handles will allow you to lift them
all together when removing and/or
checking on food. When removing
the glass tray while it is still hot, be
extremely careful and always use
oven mitts. For best results, follow
the time, power, and cooking rack
height instructions given in the
cooking chart and the recipe book.
No preheating required.
Step 2
Step 3
WARNING
Do not touch the
t r a n s p a rent dome or any
s u rfaces on the Heat
C o n t rol assembly during
operation. The air inside
the cooking dome
reaches a temperature of
338˚F/170˚C which
makes the surface very
hot and may cause
b u rn s .
6
Setting On/Off
• After plugging in the Flavorwave start the unit by pushing the
"ON/OFF" button.
• The default "0" setting is indicated in the display panel.
• Flavorwave does not emit any heat at this setting.
Using Express Function - Setting "Level"
This setting provides the highest cooking temperature of 400˚F. The
cooking times are 1 hour for Level 1, 45 minutes for Level 2, 30
minutes for Level 3, and 15 minutes for Level 4.
• Press the "LEVEL" button.
• The default "_" setting is indicated in the display panel.
• By pushing the "LEVEL" button the power level changes from
Level 1-> Level 2-> Level 3 -> Level 4 ->.
• Verify the correct "LEVEL" setting in the control panel.
• Push the "START" button.
• If the "LEVEL" setting needs to be corrected, reenter the
required Level. If the "LEVEL" setting needs to be changed after
the Flavorwave starts, push the "PAUSE/CLEAR" button and
reenter required "LEVEL".
• When cooking is done, the Flavorwave Oven™ Deluxe will "beep."
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flavor deluxe

Table of Contents