Introduction
Hardkeys can be used in many function and display
mode combinations. Although hardkeys are
mentioned throughout this manual, this chapter
provides a single source of detailed descriptions for
using hardkeys and their accompanying softkeys.
Using Display Mode Softkeys
Press d at any time. The Display Mode Softkeys
appear, showing the modes available with the
present measurement function. Modes available with
VAC, VDC, mV DC, A, and mAµA are shown.
Combo
Meter
View
Trend
Exit
Using the Hardkeys
The GMM test tool now highlights the present
selection and allows you to do the following:
•
Change display mode. Softkeys for the new
display mode now appear.
•
Return without changing the display mode.
Press d again, or press the softkey for the
selected display mode, or press 5 to exit.
Combo (the default mode set at the factory) appears
automatically when the selector is set to VAC, VDC,
mV DC, Amps, or mAµA. You can also select Meter
as the default for these functions on the SET UP
screen. Meter is the only mode available for Diode
and Capacitance Test. Meter and Trend are the
Chapter 4
4-1