Table of Contents
Advertisement
867B/863
Users Manual
Softkey Labels
The present uses for the five softkeys appear immediately
below the display.
Upper Status Line
The top display line identifies active operations as shown
in Table 3-2.
Lower Status Line
The bottom display line (immediately above the softkey
labels) identifies the display mode, function, and range.
l
The
safety indicator also appears here if dangerous
voltage is detected at the input terminals when the actual
reading is not displayed.
Message Boxes
Message boxes appear in the lower display when the
GMM test tool is performing an operation that you may not
want to interrupt ("Saving" or "Printing").
3-8
Overload Indication (OL)
"OL" or "-OL" appears in the primary and secondary
displays when an input has exceeded the present range
(in Manual) or has exceeded the highest range available
in this function (in Auto). A clipped waveform can appear
in Combo or View mode (DC Volts, mV DC, DC Amps, DC
mAµA functions only) if a large ac signal is riding on an
overloaded dc signal.
Window
Display
Figure 3-3. Display Features
Status Line (Upper)
Primary Display
Secondary Display
Status Line (Lower)
Softkey Labels
rita0390.eps
Hide quick links:
Advertisement
Table of Contents
