Fluke 867B User Manual page 53

867B/863
Users Manual
Number Example
1 Combo
Meter
View
Trend
2 Rel
1
3
r
4
M
5
3-4
Table 3-1. General Features
Name
Combo, Meter, View, and Trend are the standard measurement display modes
Display
for most functions. Auto Diode Test, LOGIC Test, and COMPONENT Test use
unique display modes. Refer to Figure 3-3 for descriptions of display features.
Labels define present uses for associated softkeys. A highlighted label means
Softkey
that item is presently selected. Labels change with rotary selector positions and
Labels
key presses. If a small
an additional set of softkey labels (a submenu) by pressing this softkey.
The five blue softkeys serve different functions, depending on the rotary
Softkeys
selector position and other keys in effect.
Press at any time to change the range of a meter reading or the amplitude of a
Range
waveform. Select "Auto" (the standard selection) for an optimal display or
Key
"Manual" for selection of a specific range. Present range information is shown in
the lower right corner of the display. Refer to Range Softkeys in Chapter 4.
Press once to enable a display showing minimum, average, and maximum
Min Max
values. Refer to Min Max Softkeys in Chapter 4.
Key
Description
> symbol appears with a softkey label, you can access