Measuring Ohms, Continuity, And Conductance - Fluke 867B User Manual

1 2 3 4 5
FREEZE
HZ
DISPLAY SAVE MIN
RANGE
MODE MAX
PRINT
TOUCH
HOLD
WAKE UP
A mA/ A EXT TRIG COM V
Figure 2-4. Ohms, Continuity, and Conductance
Measurements
3
4
1
2
Red
rita0580.eps
Making Measurements

Measuring Ohms, Continuity, and Conductance

Measuring Ohms, Continuity, and
Conductance
6
Turn the Selector to Ohms. Softkeys for
Meter and Trend Modes appear
momentarily. Wait briefly to accept Meter
Mode, or press 4 to select Trend Mode.
7
Connect the test leads as shown.
8
Use the Ohms (Meter or Trend Mode)
Softkeys as discussed below.
9
F is not available in Ohms; all other
hardkeys can be used.
At any time, press d and one of the softkeys
(Combo, Meter, View, or Trend) to show the
measurement in a different display mode.
2
2-9