Converting The Fireplace To Top Vent (Continued)11 - Travis Industries GreenSmart 2 Fireplace 564 SS GSR2 Installation Manual

Converting the Fireplace to Top Vent (continued)
© Travis Industries
Installation
(for qualified installers only)
Remove the 4 screws securing the
exhaust cover plate. Verify the gasket
on the cover plate is in place, then
attach it to the rear-facing exhaust
port with the same screws.
Verify the gasket on the inner flue
assembly is in place, then attach it to
the upward-facing exhaust port using
the screws removed earlier.
4140221
Verify the gasket on the intake cover
plate is in place, then attach it to the
rear of the fireplace using the screws
removed earlier.
Verify the gasket on the outer flue
assembly is in place, then attach it to
the top of the fireplace using the
screws removed earlier.
11
100-01345