Samsung SCX-5315F Service Manual page 24

Disassembly and Reassembly
3-8 Exit Ass'y
1. Before you remove Exit Ass'y, you should
remove:
- Rear Cover (see page 3-1)
- Scanner Ass'y (see page 3-2)
2. Remove four screws, and then untie the harness
from the Exit Upper. Unplug four connectors and
unlatch the Dummy Base Frame, as shown
below.
3-9 Cover Paper Exit Ass'y
1. Before you remove the Cover Paper Exit Ass'y,
you should remove:
- Rear Cover (see page 3-1)
- Scanner Ass'y (see page3-2)
3-14
3. Move the Exit Roller Release Lever to the upright
position as shown in the diagram below and lift
the exit ass'y to remove it.
2. Remove two screws and Cover Paper Exit Ass'y,
as shown below.
Cover Paper Exit Ass'y
Samsung Electronics