Rear View - IBM 7208 Model 345 Service Manual

Rear View

Figure 2 shows the connector locations on the 7208 Model 345 Tape Drive:
Figure 2. Rear View of the 7208 Model 345 Tape Drive
Table 2. LCD Messages (continued)
>> SEARCHuu====
<< SEARCHuu====
<< REWINDuuu===
V×V ERASEu=====
Cleaning Messages
V))V CLEAN SOON
V))V MUST CLEAN
V))V CLEANING
V))V DEPLETED
Error Conditions
LAST 3 ERRORS
ERR 1: xx yy zz
ERR 2: xx yy zz
ERR 3: xx yy zz
1
SCSI address switch
2
SCSI bus cable connectors
A high-speed search is in progress.
The rewind function is in progress.
The tape drive is erasing data on the tape. As the data is
erased, the equal signs (=) change to boxes (u).
The tape drive needs to be cleaned.
The tape drive must be cleaned when advanced
metal-evaporated (AME) media is inserted after using metal
particle (MP) media.
Cleaning is in progress.
The cleaning tape in the cartridge is used up and the tape
drive will eject it. Insert a new cleaning cartridge.
A hardware error has occurred. The LCD displays the last
three error codes, with ERR 1: xx yy zz as the most
recent. xx = the fault symptom code (FSC). yy and zz =
additional information for product support personnel (the
information may or may not be present). To resolve the
error, refer to "Appendix B. Fault Symptom Codes and
Error Recovery Procedure Numbers" on page 41.
3
4
Fan
Power cable connector
Chapter 1. Reference Information
5